Roberts Radio Gemini 46 RD-46 - Manual (Page 10)

9
1
Finding new stations - DAB
As time passes new stations may become available. To find new stations
proceed as follows:-
1. Press and release the Auto Tune button, the display will show
"Auto tune Quick scan". Your radio will perform a scan of the UK
DAB frequencies. As new stations are found the station counter on
the right-hand side of the display will increase and stations will be
added to the list.
2. To carry out a full scan of the entire DAB Band III frequencies press
and hold down the Auto Tune button for more than 2 seconds and
then release. The display will show "Auto tune Full scan". As new
stations are found the station counter on the right-hand side of the
display will increase and stations will be added to the list.
Signal strength display - DAB
1. Press and release the Select button until the display will show signal
strength.
2. Position your radio and carefully angle the telescopic aerial for best
reception using the signal strength display as a guide. Move your
radio around and position so as to give maximum number of black
rectangles on signal strength display. The clear unfilled rectangle
indicates minimum signal level required for satisfactory reception.
3. Press the Select button to exit the signal strength display.
2
1,3