Roberts Radio Gemini 46 RD-46 - Manual (Page 17)

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-
020.8758.0338.(Mon-Fri)
16
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold down the Info button for 2 seconds "Software" will
be displayed.
2. Press the Tuning Up/Down buttons until the display shows "or
SELECT Factory reset".
3. Press in and release the Select button to select System reset.
4. Press the Select button, a full reset will be performed. All presets and
station lists will be erased.
5. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the product
(reconnection of power source may be required) to resume normal
operation.
If a problem persists our technical staff would be pleased to of-
fer any assistance on operating the radio. Our technical helpline
number is 020 8758 0338.
Recalling a preset
1. Press the On/Off button to switch on your radio.
2. Select the required waveband.
3. Momentarily press the required Preset button, your radio will tune to
the station stored in preset memory.
1
3,4
1
3
2 2