Roland TD-6 - Manual (Page 81)

81
Chapter 4 Setting the Metronome (Click Edit)
4
Setting the Time Signature
(Time Signature)
Specify the time signature of the click sound.When the
numerator is set to “0,” no accent is added to the first beat. The
metronome click sound then plays at a fixed volume.
It is not possible to change the time signature of the metronome
clicks while a song is playing back. The metronome clicks
corresponds to the time signature of the song.
fig.04-008_50 (CLICK-Time Signature)
Time Sig (Time Signature):
0–13/2, 0–13/4, 0–13/8, 0–13/16
Setting the Interval (Interval)
Setting How the Sound Plays (Interval).
fig.04-009_50
Interval:
1/2 (half note), 3/8 (dotted quarter note),
1/4 (quarter note), 1/8 (eighth note),
1/12 (12th note), 1/16 (16th note)
Selecting the Click Sound (Inst)
You can choose the sound for the metronome click. When the
parameter is set to “VOICE,” the click is sound becomes a
human voice.
fig.04-010_50
Inst:
VOICE, CLICK, BEEP, METRONOME, CLAVES,
WOOD BLOCK, STICKS, CROSS STICK,
TRIANGLE, COWBELL, CONGA, TALKING DRM,
MARACAS, CABASA, CUICA, AGOGO,
TAMBOURINE, SNAPS, 909 SNARE, 808
COWBELL
Stereo Position (Pan)
You can localize the metronome click within the stereo sound
field.
The effect set here is applied only when connected in stereo.
fig.04-011_50
Pan: L15–Center–R15
L15: Sound is positioned at the extreme left.
CENTER: Positions the sound in the center.
R15: Sound is positioned at the extreme right.
Inserting a Count Before Playback
or Recording (Play Count In, Rec
Count In)
You can have a count sound (click) inserted before recording
or playback of a song begins.
fig.04-012_50
PlyCountIn (Play Count In):
OFF, 1MEAS, 2MEAS
fig.04-013_50
RecCountIn (Rec Count In):
OFF, 1MEAS, 2MEAS
OFF:
Playback/recording will begin without a count-in.
1MEAS:
Playback/recording begins after a 1-measure count-in.
2MEAS:
Playback/recording begins after a 2-measure count-in.