Ratoc Systems PCIU2 - Manual (Page 11)

11
3-3. Installing the driver(Windows 2000)
Before you install the driver, make sure Windows 2000 Service Pack2 or later is already installed .
To verify Service Pack2 or later is installed, right-click on [My Computer], and then select [System
Properties].If you can find a “Service Pack” string as shown below, Service Pack is already installed in
your system.
After verifying Service Pack2 or later is installed, follow the steps:
1. When you start your PC after installing the PCIU2, the following Hardware Wizard will
appear. Insert the PCIU2 CD-ROM into the CD-ROM drive and click [Next].
2. Select [Search for a suitable driver for my device(recommended)] and click [Next].