Ratoc Systems PCIU2 - Manual (Page 5)

5
After installing it, start your PC. Then, you need to install the driver for the PCIU2.
A)When you use Windows 98SE----------- Proceed to Chapter 3-2.
B)When you use Windows 2000------------Proceed to Chapter 3-3.
C)When you use Windows Me--------------Proceed to Chapter 3-4.
Turn off your computer and install the PCIU2 into a PCI slot.
Please note the following:
1.You have to install the PCIU2 firmly. If the PCIU2 isn’t installed firmly, this product or
your PC may get damaged.
2.Be sure the gold contact of the PCI board is completely in a white PCI slot.
3.Be sure to fasten the bracket of the PCI board with a screw as shown below.
3. Setting up
3-1. Installing the PCI board