Roland fm/am radio - Manual (Page 18)

18
Basic structure
The ARX series SuperNATURAL expansion boards receive
performance data and control data from a host instrument compatible
with the ARX series, and send audio signals to the host instrument.
* The ARX series supports up to sixteen parts, but this product is
designed with only one part.
* When this product is installed to the Fantom-G, you can apply
effects to its output such as reverb that are inside the Fantom-G.
* Since this product realizes a wide range of editing, depending on
the playback device that you use and the settings of the
parameters of this product, symptoms such as distorting and
cracking sounds may occur. In this case, please do the following.
• Make the parameters that are related to the level of this
product to a smaller value.
• Make the output level of the device that this product is
installed smaller.
• Lower the volume of the playback device.
* This product does not correspond to the following parameters of
the Fantom-G. When this product is installed to the Fantom-G, the
following parameters will be ignored if they are edited.
• Part Output Level
• Part EFX1 Send Level
• Part EFX2 Send Level
The Structure of ARX-02 ELECTRIC PIANO
ARX-02 ELECTRIC PIANO
Patch 050
Patch 001
Tone
Effect
Pre Amp
Speaker
Bar Angle Bell/Thump
Pickup Distance Bell Character
Type
To ARX compatible device
(Audio signal)
From ARX compatible device
(Performance data)
ARX-02_e.book 18 ページ ２００８年３月７日 金曜日 午後７時２２分