Roland fm/am radio - Manual (Page 29)

29
MFX 06: FLANGER MFX 07: DELAY
Parameter Value Description
Pre Delay 0.0–100 ms
Adjusts the delay time from the direct
sound until the flanger sound is heard.
Sync OFF, ON
When this is set to ON, the effect is
synchronized with the tempo.
See “About Note” (p. 36).
Rate
0.05–
10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Feedback -98–+98 %
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the phase.
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W Volume balance between the direct sound
(D) and the flanger sound (W)
Level 0–127 Output Level
Parameter Value Description
Sync OFF, ON
When this is set to ON, the effect is
synchronized with the tempo.
See “About Note” (p. 36).
Delay Time
0–1300 ms,
note Delay time from when sound is input to
delay until the delay sound is heard.
Acceleration 0–15
When you change the delay time, this
setting specifies the time over which it will
change from the current delay time to the
new setting.
The speed of pitch change will change
together with the delay time.
Feedback -98–+98 %
Specifies the percentage (%) of the delay
sound that will be returned to the input.
Positive (+) settings return the sound at
the original phase, and negative (-) set-
tings return the phase-reversed sound.
HF Damp
200–
8000 Hz,
BYPASS
Specifies the frequency at which to cut the
high range of the delay sound returned to
the input.
Choose the BYPASS setting if you don’t
want to cut.
Low Gain -15–+15 dB Gain of the low range
High Gain -15–+15 dB Gain of the high range
Balance
D100:0W–
D0:100W Volume balance between the direct sound
(D) and the delay sound (W)
Level 0–127 Output Level
ARX-02_e.book 29 ページ ２００８年３月７日 金曜日 午後７時２２分