Roland Classic Organ C-200 User Manual

Page 31

Advertising
background image

31

Additional Convenient Functionality <Advanced Operation>

Saving you registration set

The C-200 allows you to save the contents of its 8 regis-
tration memories to an optional USB memory.

1.

Insert an optional USB memory into the C-200’s USB
Memory port.

2.

While holding down the [Function] piston, press the
[Memory Piston].

The [Function] piston and [Memory Piston] start flash-
ing.

3.

Release the [Function] piston and [Memory Piston].

Be sure to proceed with step (4) within ±10 seconds. If
you wait longer, the [Function] piston and [Memory
Piston] go dark. After that, you need to return to step (2)
if you still want to save the registration settings.

4.

While holding down the lower part of the
[SUBBASS 16] tilt tab, press the [Fortepiano] piston.

The [Fortepiano] piston starts flashing. When it stops
flashing, your registration has been saved to the “C200”
folder on the USB memory (“CS200_MEM.DAT”). If that
folder doesn’t yet exist, it will be created automatically.

Loading you registration set

Here is how to transfer the registration settings on an
optional USB memory back to the C-200’s internal mem-
ory (a process called “loading”).

Loading a registration set will overwrite (replace) the
settings in the C-200’s internal memories. Be sure to save
them to a different optional USB memory before pro-
ceeding.

1.

Insert an optional USB memory into the C-200’s USB
Memory port.

2.

While holding down the [Function] piston, press the
[Memory Piston].

The [Function] piston and [Memory Piston] start flash-
ing.

3.

Release the [Function] piston and [Memory Piston].

Be sure to proceed with step (4) within ±10 seconds. If
you wait longer, the [Function] piston and [Memory Pis-
ton] go dark. After that, you need to return to step (2) if
you still want to load the registration settings.

4.

While holding down the lower part of the
[SUBBASS 16] tilt tab, press the [Piano] piston.

The [Piano] piston starts flashing. When it stops flashing,
your registration set (the contents of all eight memories)
has been loaded into the C-200’s internal memories.

Saving your registration set to an optional USB memory

C-200_e.book Page 31 Monday, April 4, 2011 5:22 PM

Advertising