RocketFish RF-WS01 - Manual (Page 12)

12
Setting up your system
Caution: Turn off your audio source while connecting the units
Connecting the sender
To connect the sender to an audio source:
1 Connect a stereo RCA cable from an audio source to the sender taking
care to match white and red colors at both ends. Make sure that the
cable is connected to an audio source and not a video source.
2 Connect the AC adapter connector to the sender DC IN jack.
Caution: To avoid risk of fire, and to prevent damage, only use the AC adapter
supplied with your digital wireless speakers. Make sure that power supply outlet
matches the AC adapter’s 120V before making the connection.
To right and left
output jack
To right and
left input jack
DC IN V 5
Plug the AC power
adapter in only after
your audio source is
connected to the
sender.