ResMed S8 - Manual (Page 22)

17
E
NG
LISH
H OW TO USE THE K EYPAD
M ESSAGES ON THE S8 E SCAPE LCD
Your clinician may have set your S8 E SCAPE to remind you about important events,
such as when to replace your mask, when to insert your Data Card (if your device is
Data Card enabled) and so on.
The reminder message is displayed on the LCD and is visible if the device is not
delivering therapy. The backlight on the LCD flashes when a message is displayed.
Your clinician can set any of the following reminders on your LCD:
Message Description Action
INSERT CARD May appear if
your device is
Data Card
enabled. Insert your Data Card and follow any
instructions that your clinician has given
you. When you have done this, the
message will disappear from the LCD.
Pressing the
Left (Ok) key will also
remove the message.
REPLACE
MASK May appear when
your mask is due
for replacement. Press the Left (Ok) key to remove the
message from your LCD, and replace your
mask with a new one.
CALL
PROVIDER May appear as a
reminder to
contact your
clinician; for
example to
discuss how your
therapy is going. Press the Left (Ok) key to remove the
message from your LCD, and contact your
clinician.
REPLACE
FILTER May appear as a
reminder to
replace the air
filter on your
device. Press the Left (Ok) key to remove the
message from your LCD, and replace the
air filter.
SERVICE DUE May appear as a
reminder to
return your
device for service. Press the Left (Ok) key to remove the
message from your LCD, and contact your
clinician.
338223r1.book Page 17 Friday, June 3, 2005 4:16 PM