Radio Shack 43-3901 - Manual (Page 10)

10
Memory Operation
Storing a Number in Memory
The telephone can store up to 13 phone numbers in memory (3
emergency numbers, and 10 standard memory numbers).
1. Lift the handset.
2. Press STORE, STORE appears on the display.
3. Enter the number to be stored. The number appears on the
display.
4. Press STORE again. STORE and MEM appear on the display.
5. Enter the desired memory location for the number. To
store the number in an emergency memory location, press
an emergency memory button. To store the number in a
standard memory location, press a number key (0 to 9).
Copying a Number from Caller ID into Memory
1. Lift the handset.
2. Press UP or DOWN until the desired number appears.
3. Press STORE twice. STORE and MEM appear on the display.
4. Press a memory location (0 to 9 on the keypad) to store the
number in standard memory, or press any one of the three
emergency memory buttons.
Dialing a Stored Number
1. Lift the handset.
2. To dial a number stored in an emergency location, press
that emergency button. If you are dialing a number stored
in a standard memory location, press MEM, then press the
desired memory key (0 to 9).