Using the pedals, About the adjuster, Ying the piano (p. 26) – Roland HPi-6F User Manual

Page 26: Performing, Damper pedal (right pedal), Sostenuto pedal (center pedal), Soft pedal (left pedal)

Advertising
background image

26

Performing

The pedals perform the following operations. You’ll use them mainly

when playing piano.

Soft Pedal

Sostenuto Pedal

Damper Pedal

Damper Pedal (right pedal)

Use this pedal to sustain the sound.
While this pedal is held down, notes will be sustained for an extended

time even if you release your fingers from the keyboard.
The length of sustain will change subtly depending on how deeply you

press the pedal.

MEMO

When you depress the damper pedal on an acoustic piano, you

should be able to hear the sound of strings that are resonating in

sympathy with the notes that you played (damper resonance). This

results in an expansive, richly resounding sound.
This instrument is capable of re-creating such damper resonance,

and it can be adjusted at will.

Sostenuto Pedal (center pedal)

The notes you are pressing when this pedal is depressed will be

sustained.

Soft Pedal (left pedal)

This pedal is used to make the sound softer.
Playing with the soft pedal depressed produces a sound that is not as

strong as when otherwise played with the equivalent strength. This is

the same function as the left pedal of an acoustic piano.
The softness of the tone can be varied subtly by the depth to which

you press the pedal.

MEMO

You can switch the function of the sostenuto pedal and soft pedal

(p. 58).

NOTE

If you disconnect the pedal cord from the HPi-6F while the power is

turned on, the pedal effect will remain applied. You must connect

or disconnect the pedal cord while the HPi-6F’s power is switched

off.

About the Adjuster

If you feel that the pedal is unstable (for example if you’ve moved the

HPi-6F to a different location), you can adjust the adjuster located on

the bottom of the pedals as follows.

Adjuster

Turn the adjuster to lower it until the adjuster is in firm contact with

the floor. The pedal may be damaged if there is a gap between the

adjuster and the floor. In particular, when you’ve placed the HPi-6F on

carpet, you must turn the adjuster until it is pressing firmly against the

floor.

Using the Pedals

Advertising