Roland HPi-6F - Manual (Page 33)

33
Performing
Changing the Tones of the Right and Left-hand Areas
2 1
1. Use the cursor buttons to select the “right-hand tone” or “left-hand tone.”
2. Use the cursor up/down buttons to select the desired tone.
MEMO
• If you want to switch tone groups, press a tone button while “left-hand tone” or “right-hand tone” is selected. Use the cursor up/down buttons to
select tones within the selected tone group.
• The pitch of the left-hand tone can be changed one octave at a time. This is called the “Octave Shift” function. To make settings for “Octave Shift,”
carry out the following steps.
1. Press the [Application/Lesson] button ➝ [Function] ➝ [O] button ➝ [Octave Shift] ➝ [O] button (p. 22).
2. Use the cursor up/down buttons to adjust the pitch.
Changing the Split Point
1. Use the cursor buttons to select the Split Point.
2. Press the up or down cursor button.
The split point will change. The split point can be adjusted in the range of B1–B6.
MEMO
The modified setting will return to its original state when you turn off the power. If you want, you can have the settings be retained even while the
power is turned off (p. 58).
Cancelling Split Play
1. Press the [Application/Lesson] button ➝ [Split] ➝ [O] button.
The indicator in the screen will go out.
Indicator
If Split is off, this
indicator will go out.