Radio Shack Auvio 40-290 - Manual (Page 4)


4
3
Mount the speaker
1. Remove the grille to expose the mounting screws.
. Be sure the mounting tabs are turned in, allowing the
speaker to fit into the hole. Then insert the speaker into
the mounting hole.
. Tighten the six screws to secure the mounting tabs
to the wall or ceiling. Be careful not to overtighten the
screws.
4. Replace the grille.
n
Note: To remove the speaker from the wall or ceiling,
loosen the screws only far enough to remove the speaker.
If you loosen the screws too far, you may lose the mounting
tabs behind your wall.
Mounting Tab