Roland GI-20 - Manual (Page 33)

33
Chapter 3 Convenient Functions Featured by the GI-20
Selecting the Type of USB Driver
When using the GI-20 when it is connected to a computer,
you can select from two types of drivers.
* Be sure to set the GI-20’s driver so that it matches the driver
used by the computer. In some cases, the driver may not
function properly.
* With the factory settings, USB DRIVER is set to “VENDER
SPECIFIC.”
1. Turn off the power to the GI-20.
2. Hold down [WRITE] and turn on the power.
3. Press [SELECT], causing only the leftmost indicator of
the display to light up.
Only the leftmost indicator light when you select USB
DRIVER TYPE.
fig.03-19
4. Press [PATCH/VALUE] to select “SP” or “GE.”
5. Turn the power off.
The USB driver setting becomes effective the next time
you turn on the GI-20.
SP: VENDER SPECIFIC:
The special driver on the CD-ROM in-
cluded with the GI-20 is used, provid-
ing faster, more stable MIDI
transmission. Normally, this is what
you should use.
GE: GENERIC:
Use this setting when using the stan-
dard MIDI driver that came with your
OS.
L i t