Roland GI-20 - Manual (Page 6)

6
Panel Descriptions
Front Panel
fig.00-01
1. GK IN connector
Connect to the divided pickup using the GK cable
included with the GI-20.
* Any questions you have regarding connections to the various
GK-compatible guitars available on the market should be
directed to the relevant guitar manufacturer or dealer.
2. LED display
This displays patch numbers, parameter values, and
other information.
3. Tuner indicator
This indicates the tuning when the GI-20 is in Tuner
mode.
When setting the sensitivity, this indicates the level.
4. WRITE button
Use this for writing patches (Write procedure; p. 26).
This is also used as the button to execute Factory Reset
(p. 34) and Bulk Dump (p. 29).
5. SELECT (EXIT) button
Use this button to undo the Write procedure (p. 26) and
select functions and parameters.
6. PARAMETER knob
This is used to select the parameter to be set.
7. PATCH/VALUE buttons
Use this to switch patches and change parameter values.
8. TUNER (STRING SEL) button
Press this when using the tuner function. Use this to
select the strings when determining the parameter to set
for each individual string.
9. POWER switch
This turns the GI-20’s power on and off.
1 3 4 8 6 7
2 5 9