RadioLAN Campus BridgeLINK - Manual (Page 70)

890-007 Rev. A 01/28/99 Page 60 © 1999 RadioLAN, Inc.
Accept/Reject
The
Accept/Reject column permits you to allow or disallow transmission of the packet, depending upon the entry in
the
Source/Dest. column.
For example, if
Source is enabled in the Source/Dest. column, and the Reject radio button is enabled in the
Accept/Reject column, the CPU will not allow a message broadcast from that MAC Address to pass through. If
Destination is enabled in the Source/Dest. column, and the Reject radio button is enabled in the Accept column, the
CPU will not allow the message intended for that MAC Address to pass through.
Alternatively, if
Source is enabled in the Source/Dest. column, and the Accept radio button is enabled in the
Accept/Reject column, the CPU allows the message from that MAC Address to pass through. If Destination is
enabled in the
Source/Dest. column, and the Accept radio button is enabled in the Accept/Reject column, the CPU
allows the message from that MAC Address to pass through.
Adding MAC Filters
To add up to 32 MAC filters, select the first available (blank)
Item:
1. Fill in the
MAC Address and subnet Mask Bytes fields.
2. In the
Source/Dest. column, select whether the filter will be invoked when the address is sending a packet or
when it is receiving a packet:
Choose
Source if you want to filter messages that are broadcast from the MAC Address.