Roberts Radio TCR-200 - Manual (Page 10)

10
Setting the Recording Speed
Set SPEED to EXT (extended) to record
at a slower speed and a lower quality
than regular speed, but extend the re-
cording time. Tapes recorded with
SPEED set to EXT must be played back
with the recorder set to EXT .
Set SPEED to STD (standard) to record
at regular speed. When you record with
SPEED set to STD , you can play back
the tape on this recorder (with SPEED
set to STD ) or any other cassette tape
player.
Listening While You Record
Set MONITOR to ON to listen to a conver-
sation through the telephone cassette
recorder’s speaker as it is being record-
ed. Slide
VOLUME to a comfortable lis-
tening level.
Note: While you record your own phone
conversation, set
MONITOR to OFF . Oth-
erwise, it might cause a high-pitched
tone to sound through your telephone
handset or through the telephone cas-
sette recorder’s speaker.
REGULAR RECORDING
You can use your telephone cassette re-
corder as a regular cassette recorder for
recording dictation or conversations. For
regular recording, be sure the dual-
prong cord is not plugged in.
Set REC MODE to NORM for continuous
recording, then press RECORD . Both
RECORD and PLAY lock down. Then
speak into the built-in microphone from
a distance of about 12 inches.
Note: To temporarily stop recording,
press
PAUSE . To resume recording,
press PAUSE again.
To stop recording, press STOP/EJECT.
STD EXT OFF ON
DC 6V 300mA
VOX NORM
REC MODE MONITOR SPEED
STD EXT
SPEED
OFF ON
DC 6V 300mA
VOX NORM
REC MODE MONITOR
PLAY RECORD STOP/EJECT
CUE REVIEW
FAST-F REWIND PAUSE
43-473.fm Page 10 Friday, August 13, 1999 9:21 AM