Rio Audio SP350 - Manual (Page 28)

Index
Troubleshooting
28 Contents
RioV
olt MP3/WMA >> CD Pla
yer
I get an error
message when I
start encoding a
CD.
The following factors may interfere with the CD encoding process:
• Over-utilization of the CPU during the encoding process. Close all other
software before encoding.
• Insufficient RAM to cache the track properly. Generally, 64 MB is fine if no
other memory-intensive application is running. Close all other software before
encoding.
• CD-ROM firmware. Even if a CD-ROM drive is new, it may require a firmware
update from the manufacturer to correct audio extraction errors.
• Overclocking. Overclocking the system—running it faster than it is rated to
run—can have adverse effects on peripheral components. If your system is
overclocked, bring it back to its normal operating speed.
Problem Solution