RTS CLD Color Keypanel Family KP 32 CLD - Manual (Page 111)

105
To remove a solo key, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3( ↑) or 6(↓), select Key Options.
3. Press the SEL button.
The Key Options submenu appears.
4. Using the 3( ↑) or 6(↓), select Solo.
5. Press the SEL button.
Tap Key appears in the panel display.
6. Tap down on the red solo keypanel key from which you want to remove the solo assignment.
The selected key turns red and Tap Slave Key(s) appears in the display window.
Key Options Menu, Tallies
Tallies are used to indicate incoming calls with blinking alpha assignments. You can configure tally time as 15 seconds or an
indefinite period of time. If indefinite is chosen, the tally continues to blink until the call is answered.
By default, tallies are set to 15 seconds.
To set the tally time on an incoming call, do the following:
1. On the KP 32 CLD keypad, press MENU.
The Top Level menu appears.
2. Using the 3( ↑) or 6(↓), select Key Options.
3. Press the SEL button.
The Key Options submenu appears.
4. Using the 3( ↑) or 6(↓), select Tallies.
5. Press the SEL button.
15 Seconds and Indefinite appear in the display window.
FIGURE 105. Key Options Menu - Tallies Menu