RTS CLD Color Keypanel Family KP 32 CLD - Manual (Page 151)

145
APPENDIXA
Boot Loader Reset
Boot Loader Reset - BLR Button
The BLR (Boot Loader Reset) button is used to upload a new boot load image to a keypanel with a corrupt/bad image
installed.
NOTE: The instructions provided below are applicable for all CLD family keypanels; however, the instructions below
display the KP 32 CLD
To run the boot loader, do the following:
NOTE: To force a boot reload, the keypanel must first be powered down.
1. Verify the KP CLD is powered OFF, but still connected to the FRAME.
2. Using a screwdriver, press the BLR Button located on the back of the keypanel.
3. While the BLR button is pressed, connect the power cord to the keypanel.
KP 32 CLD - Boot Loader Waiting for Download... appears in the display window.