Using the detergent, Setting and starting a programme setting mode, Starting a programme without delay start – AEG ELECTROLUX F 65000 VI 1 P User Manual

Page 35: Starting a programme with delay start

Advertising
background image

USING THE DETERGENT

20

30

M AX

1

2

3

4

+

-

A

B

C

CAUTION!
Use only detergents for dish-
washers.

1. Press the release button (B) to

open the lid (C).

2. Put the detergent in the compart-

ment (A) .

3. If the programme has a prewash

phase, put a small quantity of de-
tergent on the inner part of the ap-
pliance door.

4. If you use detergent tablets, put

the tablet in the compartment (A).

5. Close the lid. Make sure that the

release button locks into position.

Do not use more than the cor-
rect quantity of detergent. Refer
to the instructions on the deter-
gent packaging.

Detergent tablets do not fully
dissolve with short programmes
and detergent residues can stay
on the dishes.
We recommend that you use
detergent tablets with long pro-
grammes.

SETTING AND STARTING A
PROGRAMME

Setting mode

The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• The display shows two horizontal sta-

tus bars.

If the control panel shows other condi-
tions, press RESET until the appliance is
in setting mode.

Starting a programme without
delay start

1. Open the water tap.

2. Press the on/off button to activate

the appliance. Make sure that the
appliance is in setting mode.

3. Set the programme.

• The related programme number

flashes in the display.

4. If you want, you can set the options.
5. Close the appliance door. The pro-

gramme starts.
• If you open the door, the display

shows the programme duration
that decreases with steps of 1 mi-
nute.

Starting a programme with
delay start

1. Set the programme.
2. Press the delay button again and

again until the display shows the de-

ENGLISH

35

Advertising