Reliable F3 - Manual (Page 6)

6
C. To close the front pressing plate
nd st 1. Pull the press board bar to the 2 step ( 1 step is for thick trousers or pants).
2. Hold the waistline of the pants and gently pull upwards. This will smooth
out any wrinkles and ensure that the trousers are lying flat between the front
pressing plate and press board.
3. Pull the press board bar down firmly until the front pressing plate is fully
locked into the closed position.
* Pull the pants upwards once again.
D. Plug the cord into the power socket. The power indicator light will illuminate,
and the press will start automatically.
E. The press will automatically shut off when the job is completed, and the
power indicator light will also goes off. To restart the pressing, press the
"on" button, the power indicator light will illuminate again and start the
pressing cycle.