Reliable F3 - Manual (Page 7)

TROUBLESHOOTING GUIDE
Below is a chart detailing the most common problems, their causes and solutions.
Prior to troubleshooting, isolate the unit by removing the cord from the power socket.
Unit fails to operate
properly.
Unit fails to heat up.
Unit is not plugged in.
Unit is damaged
or malfunctioning.
Plug into electric socket
and make sure the power
Indicator light is on.
please contact a
licensed technician.
Unit is not plugged in.
The press board has
been damaged or is
malfunctioning.
Plug into electric socket.
Immediately stop use
and let the unit cool
down completely.
Contact a licensed
technician.
PROBLEM CAUSE SOLUTION
7