Radio Shack 10 Disc CD Changer - Manual (Page 15)

15
Mounting the CD Changer
Controller
The supplied hook-and-loop fastener
lets you securely mount the CD changer
controller on the dashboard and easily
remove it when you need it.
Select a mounting location, then follow
these steps to secure the controller.
1. Clean both mounting surfaces with
isopropyl alcohol and allow them to
completely dry.
2. Peel the backing from one side of
the hook-and-loop fastener and
attach it to the mounting location.
3. Peel the backing from the other side
of the hook-and-loop fastener and
press the controller onto the fas-
tener.
Reconnecting the Vehicle’s
Battery
When you finish mounting the compo-
nents, reconnect the cable to the vehicle
battery’s negative (–) terminal.
12-2182.fm Page 15 Friday, September 3, 1999 7:31 AM