Radio Shack 10 Disc CD Changer - Manual (Page 9)

9
Follow these steps to install batteries.
1. Slide the battery compartment cover
in the direction of the arrow to
remove it.
2. Place the batteries in the compart-
ment as indicated by the polarity
symbols (+ and –) marked inside.
3. Replace the cover.
When the remote control stops operat-
ing properly, replace the batteries.
Warning: Dispose of old batteries
promptly and properly. Do not burn or
bury them.
Caution: If you do not plan to use the
remote control for a long time, remove
the batteries. Batteries can leak chemi-
cals that can destroy electronic parts.
12-2182.fm Page 9 Friday, September 3, 1999 7:31 AM