Redring 350S - Manual (Page 10)

10
5. Re-Fit the front cover (see diagram 9)
a. Ensure outer knob “A” is aligned fully anti-clockwise to the “ (stop)” position.
b. Ensure inner knob “B” is aligned fully to the “ (medium)” position.
c. In the main body of the shower, turn the “Drive Spider” fully anti-clockwise until it stops.
d. In the main body of the shower, turn the “Drive Gite” until it is at “3 o’clock”.
e. Fit the front cover of the shower to the main body ensuring that the 3 x “Drive Spider Legs”
engage with the slots in outer knob “A”.
f. Check that inner knob “A” has been correctly aligned by ensuring that the knob can turn
approximately 3/4 of a turn (270°).
g. Check that outer knob “B” has been correctly aligned by ensuring that all 3 power settings can
be selected, and the knob “B” returns to the “ (stop)” position.
6. Replace the top and bottom fastening screws.
7. Fit the shower hose, and operate the shower first without the handset to flush out particles,
fit the handset and then operate the shower as on page 3 or 12 and check:
a. That the water gets to a satisfactory temperature.
b. Water flow can be adjusted by inner control knob “B”.
c. Power selection operates in all 3 positions, giving a change in water temperature and
that the neon light functions correctly.
d. Check again for leaks
e. That the holes in the shower handset are not blocked
8. DEMONSTRATE OPERATION TO USER
Please Note:- The fitting of Spare Parts must be supervised by a suitably qualified person.
White 2 metre Shower Hose Cat No. 83792578 Front Cover Cat No. 93597857
WRAS Water Isolating Valve Cat No. 93792452 Tank-Base Assy (7.2kW) Cat No. 93597858
Chrome Standard Accessories Cat No. 83595317 Tank-Base Assy (8.5kW+) Cat No. 93597859
Chrome Premium Accessories Cat No. 83595319 Solenoid Valve Cat No. 93590722
Chrome Curved Accessories Cat No. 83595320 Neon Cable Assy Cat No. 93590506
Curtain and Rail Pack Cat No. 83792812 Tank Clip Cat No. 93590715
Curtain and Rail Pack with PRV Washer Cat No. 93795817
Non-Slip Mat Cat No. 83792811 Cylinder “O”-Ring Cat No. 93795809
Thermal Cut-Out 50/88°C Cat No. 93597871
Phased Shut-Down PCB Cat No. 93597877
Handset Cat No. 93597862
Height Adjuster Cat No. 93597861
ADDITIONAL ACCESSORIES SPARE PARTS
Additional accessories and spare parts can be
supplied against any Credit or Debit cards
from Redring Sales Hotline 08709 000420