Roberts Radio DreamTime2 User Manual
Page 24
23
Setting the clock manually
Normally your clock radio will set its clock automatically using the DAB
radio signal. If no DAB signal is available and you need to set the time
manually, please follow the procedure shown below.
1. Press
the
On / Standby button to switch on the clock radio.
2. To set the clock time, press and release the Menu button to enter the
setup menu.
3. Press
the
Tuning Up or Down buttons until 'CLOCK' appears on the
display. Press and release the Select button.
4. Press
the
Tuning Up or Down buttons until 'MANU CLK' appears on
the display.
5. Press and release the Select button to enter the manual setting
procedure. The hour digits will then fl ash on the display.
6. Press
the
Tuning Up or Down buttons to set the desired hour.
7. Press and release the Select button to enter the hour setting.
8. The minute digits will then fl ash on the display. Press the Tuning Up
or Down buttons to set the desired minute.
3-8
3-7
2
3-8