Raymarine GPS Plotter - Manual (Page 85)

4-8 Raynav 300 GPS Plotter
NMEA Input
Select the NMEA input setting as appropriate. This can be set to either
NMEA or RTCM. RTCM input is 4800 baud only.
Language
Select the language in which you wish information to be displayed. The
selected language will be used for screen text, labels, menus and options,
but will not affect the letters displayed by the context-sensitive cursor.
The language setting also affects the display format for lat/long position
information.
Simulator
The simulator allows you to operate your Plotter without data from the
antenna and/or external data sources. When the simulator is switched on,
a SIMULATOR data box is displayed during operation, showing that
simulation has been selected.
4.4 Plotter Set Up Parameters
The PLOTTER SET UP option allows you to set up the Plotter according to
your system configuration and your personal preferences.
The following table lists the Plotter Set up parameters and their options,
shows the factory default setting and provides a space for you to make a
note of your new default setting. Each parameter is described in the
following subsections.
Table 4-2: Plotter Set Up Parameters
Parameter Options
Factory
Default New
Default
CUSTOMISE PLOTTER See below for
details
CHART ORIENTATION NORTH UP
COURSE UP
HEAD UP NORTH UP
WAYPOINT SYMBOLS OFF
ON ON
WAYPOINT NUMBERS OFF
ON ON
DEFAULT WAYPOINT
SYMBOL Fish, skull,
X or anchor symbol X
81171_4.BOOK Page 8 Thursday, November 29, 2001 11:34 AM