Roland Sonar V-Studio VS-700 - Manual (Page 70)

70
AUDIO OUTPUT Section
The VS-700R I/O box provides two sets of stereo outputs (main and sub) for monitoring. The VS-700C console also
provides two headphone outputs.
The AUDIO OUTPUT section lets you control the volume of the MONITOR output and each headphone
output. You can also mute the MONITOR output and assign each headphone to monitor the MAIN/SUB output.
fig.37.eps
A. [PHONES 1] knob
B. [PHONES 2] knob
C. [MONITOR] knob
D. [SUB] button (for Phones 1)
E. [SUB] button (for Phones 2)
F. [MUTE] button
Interface Explanation
PHONES 1
Controls the volume of the first headphone output. By default, the MAIN output is sent
to the headphones.
PHONES 2
Controls the volume of the second headphone output. By default, the MAIN output is
sent to the headphones.
MONITOR
This controls the volume of the monitor outputs (sub and main) on the VS-700R I/O box.
It does not affect the volume of the headphone output.
SUB (below PHONES 1) Sends the SUB stereo output to headphones 1.
SUB (below PHONES 2) Sends the SUB stereo output to headphones 2.
MUTE
This mutes the monitor outputs (sub and main) of the monitor outputs on the VS-700R
I/O box. It does not mute the headphone outputs.
A B C
D E F
VS-700_r_e.book 70 ページ ２００８年１１月２０日 木曜日 午後２時２８分