Controlling plug-ins from the vs700c console, Controlling plug-ins from the vs-700c console, Controlling plug-ins – Roland Sonar V-Studio VS-700 User Manual

Page 74: From the vs-700c console, P. 74)

Advertising
background image

74

Controlling Plug-ins from the VS-700C Console

You can display, insert, delete and bypass track and bus plug-ins, directly from the VS-700C Console. The VS-700C

Console must be put in Plug-in mode in order to edit plug-ins.

To Enable Plug-in Mode

Hold down the [CTRL] modifier button and press a channel strip’s [SEL] button.

When Plug-in mode is enabled, the names of existing plug-ins on the selected channel strip are displayed across the

LCDs. If the selected channel strip doesn’t contain any plug-ins (FX bin is empty), “No Plugins” appears on the LCD

display.

Up to 8 plug-ins are displayed on the upper and lower rows of the LCDs as follows.

Each plug-in name is shown with up to 16 characters, which is the width of two channel strips. For each pair of plug-

ins (top and bottom row), the left channel strip corresponds to the top plug-in and the right channel strip

corresponds to the bottom plug-in.

To Insert a Plug-in

1.

Make sure Plug-in mode is enabled (refer to “To Enable Plug-in Mode” (p. 74)).

2.

Press the [ARM] button on the channel strip that corresponds to the position at which you want to

insert a new plug-in.

The [ARM] button flashes to indicate the insert position (plug-in 1–8).

3.

Turn the encoders to find the plug-in that you wish to insert.

The available plug-ins are presented on the LCD displays in a hierarchical fashion. An Item is either a plugin or a

submenu of more plug-ins. If the item is a submenu of more plug-ins, the item has a “>” character appended to the

name and the items in the submenu are shown on the next encoder to the right.

4.

Press the encoder button to insert a plug-in.

The selected plug-in is inserted in the position indicated by the flashing [ARM] button and the LCD displays revert to

showing the existing track info on the selected channel strip.

You can undo and redo any inserted plug-in. To undo, press the [UNDO] button. To redo, press [SHIFT]+[UNDO]

buttons.

LCD row

Channel strips
1-2

Channel strips
3-4

Channel strips
5-6

Channel strips
7-8

Top

Plug-in 1

Plug-in 3

Plug-in 5

Plug-in 7

Bottom

Plug-in 2

Plug-in 4

Plug-in 6

Plug-in 8

VS-700_r_e.book 74 ページ 2008年11月20日 木曜日 午後2時28分

Advertising