Robertshaw 9825I2 - Manual (Page 24)

SYSTEM SETTINGS
page 4 of 5
Auto Changeover – When this feature is selected, it allows the
thermostat to switch automatically between heating and cooling
to maintain the optimal temperature.
A warning appears with an alert that Schedule Data (your
programmed settings for the week) may change if Auto
Changeover is turned on.
(For more information, see Deadband in COMFORT SETTINGS on page 18.)
Contact Info – This is a place to store the installing dealer’s contact information.
It provides a two-line display where typically, a name is on line one, and a phone number on
line two.
Reset to Defaults – A warning appears. ALL settings (time, date,
System Settings, etc.) will be erased and original factory default
settings will replace them.
Use this feature when the heating/cooling equipment changes, or
when the way the equipment is used changes.
24
Warning!
Resetting to Factory
Defaults Will Erase
All System Settings.
Continue?
No Yes
Warning! Adjusting
Auto Changeover May
Adjust Schedule Data.
Continue?
No Yes
System Settings Menu
Back Select
Auto Changeover No
Contact Info
Reset To Defaults
Security On/Off
110-1175 English 7/17/06 1:59 PM Page 24