RF-Link WRT55AG - Manual (Page 31)

Internet
Configuration Type The type of Internet connection is displayed here.
Status For PPPoE or PPTP, the status of the Internet connection is displayed
here. If there is no connection, you can click the Connect button to re-estab-
lish it. If there is a connection, you can click the Disconnect button to end it.
IP Address, Subnet Mask, and Default Gateway The Router’s IP Address,
Subnet Mask, and Default Gateway Address, as seen by external users on the
Internet, are displayed here.
DNS The DNS (Domain Name System) IP Addresses currently used by the
Router are shown here. Multiple DNS IP settings are common. In most cases,
the first available DNS entry is used.
To refresh the Status screen, click the Refresh button. To get more information
about the features, click the Help button.
The Help screen, shown in Figure 7-19, offers links to all of the Router’s tech-
nical support resources and the application that upgrades the Router’s
firmware. For additional information about each screen of the web-based util-
ity, click the appropriate link on the lefthand side of the Help screen.
55
Instant Wireless ® Series
54
Dual-Band Wireless A+G Broadband Router
Firmware Version The version number of the firmware currently installed is
displayed here.
Current Time The current time, as set from the Setup tab, is displayed here.
Host Name The Host Name is the name of the Router. This entry is necessary
for some ISPs.
Domain Name The Domain Name is the name of the Router's domain. This
entry is necessary for some ISPs.
LAN
IP Address and Subnet Mask The current IP Address and Subnet Mask of
the Router, as seen by users on your local area network (LAN), are displayed
here.
DHCP Server The status of the Router's DHCP server function is displayed
here.
Wireless 5GHz, 802.11a
Mode The Mode setting, as set from the Setup tab, is displayed here.
SSID The SSID of the 5GHz, 802.11a network is displayed here.
Channel The channel for the 5GHz, 802.11a wireless network is displayed
here.
Encryption Function The status of the WEP encryption is displayed here.
Wireless 2.4GHz, Wireless-G
Mode The Mode setting, as set from the Setup tab, is displayed here.
SSID The SSID of the 2.4GHz, 802.11b network is displayed here.
Channel The channel for the 2.4GHz, 802.11b wireless network is displayed
here.
Encryption Function The status of the WEP encryption is displayed here.
Help
Figure 7-19