RF-Link WRT55AG - Manual (Page 5)

Dual-Band Wireless A+G Broadband Router
3
Remember that the Router’s ports connect to two sides. The 10/100 LAN ports
connect to the LAN, and the Internet port connects to the Internet. The LAN
ports transmit data at 10 Mbps or 100 Mbps, and the broadband port, or
Internet port, transmits data at 10/100 Mbps. Your wireless devices connect to
the Router through either 802.11a, 802.11b, or draft-802.11g wireless technol-
ogy.
What’s an IP Address?
IP stands for Internet Protocol. Every device on an IP-based network, including
PCs, print servers, and routers, requires an IP address to identify its “location,” or
address, on the network. This applies to both the Internet and LAN connections.
There are two ways of assigning an IP address to your network devices. You can
assign static IP addresses or use the Router to assign IP addresses dynamically.
Static IP Addresses
A static IP address is a fixed IP address that you assign manually to a PC or
other device on the network. Since a static IP address remains valid until you
disable it, static IP addressing ensures that the device assigned it will always
have that same IP address until you change it. Static IP addresses must be
unique and are commonly used with network devices such as server PCs or
print servers.
If you use the Router to share your cable or DSL Internet connection, contact
your ISP to find out if they have assigned a static IP address to your account.
If so, you will need that static IP address when configuring the Router. You can
get that information from your ISP.
Dynamic IP Addresses
A dynamic IP address is automatically assigned to a device on the network,
such as PCs and print servers. These IP addresses are called “dynamic”
because they are only temporarily assigned to the PC or device. After a certain
time period, they expire and may change. If a PC logs onto the network (or the
Internet) and its dynamic IP address has expired, the DHCP server will auto-
matically assign it a new dynamic IP address.
IP Addresses
Note: Since the Router uses NAT technology, the only IP address that
can be seen from the Internet for your network is the Router’s Internet
IP address.
However, even this Internet IP address can be blocked, so that the
Router and network seem invisible to the Internet—see the Block
WAN Requests description under Filters in “Chapter 7: The Router’s
Web-based Utility.”
Instant Wireless ® Series
2
• Dual-band, tri-standard Access Point communicates with Wireless-A
(802.11a), Wireless-B (802.11b), and Wireless-G (draft 802.11g) wireless
networks
• Protect your wireless investment while preparing your infrastructure for the
future
• Built-in 4-port Switch jump-starts your wired network, while the Router
functionality securely shares your high-speed Internet connection with
wired and wireless computers
• Advanced Security: Wireless data encryption (WEP), VPN pass-through,
Internet access control and Wireless filters
• Performance Investment Protection: Compatibility with Wireless-A
(802.11a), Wireless-B (802.11b) and Wireless-G Standards
• Built-in 4-Port 10/100 Switch Supports Wired Ethernet Clients
• All Ethernet Ports Support Auto-MDI/MDI-X -- No Need for Crossover
Cables or Uplink Port
• Wireless Security with up to 152-bit WEP Encryption
• Enhanced Security Management Functions: Port Filtering, MAC and IP
Address Filtering, DMZ Hosting, and NAT Technology
• Access Your Corporate Network Remotely through Virtual Private
Networking (VPN) -- Supports IPSec and PPTP Pass-Through
• Easily Configurable through a Web Browser -- Locally and over the Internet
• DDNS and DHCP Server Capability to Assign IP Addresses Automatically
• Supports Static and Dynamic Routing (RIP1 and 2)
Simply put, a router is a network device that connects two networks together. A
wireless router connects three networks.
In this instance, the Router connects your wired network and wireless network,
or the group of PCs in your home or office, to the Internet. The Router process-
es and regulates the data that travels between these networks.
The Router’s NAT feature protects your network of PCs so users on the public,
Internet side cannot “see” your PCs. This is how your network remains private.
The Router protects your network by inspecting every packet coming in
through the Internet port before delivery to the appropriate PC on your net-
work. The Router inspects Internet port services like the web server, ftp server,
or other Internet applications, and, if allowed, it will forward the packet to the
appropriate PC on the LAN side.
The Router’s Functions
Features