Installing the system, Audio cable (sr50 only), Antenna cable – Raymarine SR100 User Manual

Page 12: Receiver

Advertising
background image

9 Raymarine Sirius Weather System Installation Guide

with the product is used only if the case is that there are no other existing

SeaTalk

NG

, SeaTalk2 or NMEA2000 products being used in the system, in

this case separate accessory cables needs to be purchased.

Audio cable (SR50 only)

A 5ft (1.5m) cable is supplied. The audio cable should be used to connect

your SR50 weather receiver to your external audio device.

Antenna cable

An antenna cable of 25 ft. (7.5m) is supplied. This RF coax cable should be

used to connect the antenna to the weather receiver. If a longer cable is

required it should be purchased from your Shakespeare dealer. For full

details of available cable lengths refer to “Accessories” on page 21.

Installing the system

The following section gives details of how to install your SR50/SR100 Sirius

weather receiver and antenna.

Receiver

The receiver should be installed a minimum of 3 ft. (1m) away from an

engine, compass or any magnetic device.

D9065-1

Advertising
This manual is related to the following products: