Antenna install pedestal mounting, Caution – Raymarine SR100 User Manual
Page 14
11 Raymarine Sirius Weather System Installation Guide
Antenna install Pedestal mounting
Note:
If you are attaching the antenna directly to a flat surface, the cable
with its connector attached can be routed through a 9/16” hole
drilled in the mounting surface as described below or passed
through the mounting flange.
The antenna consists of the following components:
When selecting the antenna installation site, check that the area below the
site has easy access and is clear of cables and other obstructions.
Using the gasket as a template mark the center hole and 3 fixing holes.
CAUTION
Antenna cable
Cutting or splicing the antenna cable will result in severely
reduced system performance.
It is essential that the antenna TNC cable connector and
the antenna base are isolated from the ships ground.
Mounting flange
Mounting gasket
Antenna cable and
connector
D9070_1
SRA-40 Antenna
Screw
D9071-1
Step 1
D9072-1
Step 2