Roland FR-3s - Manual (Page 36)

Saving your settings (User Program) | Saving your settings (User Program)
36
r
FR-3s/FR-3/FR-3sb/FR-3b V-Accordion
6. Saving your settings (User Program)
Your FR-3 contains 10 memories where you can store the settings listed below. Working with those memories has the
advantage that you can recall frequently used settings at the press of a button. The User Program settings also include
the “address” of the last Set you selected. The following settings are saved to the User Programs:
Saving the current settings
Here is how to save the current settings of the eligible
parameters (see above) to the desired User Program
memory.
(1) Select the Set whose number should be memo-
rized.
(2) Set everything the way you want it to be when you
recall the User Program you are about to save.
(3) Press the [ORCHESTRA] and [5] registers.
(4) Press and hold the [SET] register until the “Up-”
message starts flashing.
(5) Press the Treble register ([1]~[10]) of the User Pro-
gram memory where you want to save your set-
tings.
(6) Press the [ORCHESTRA] + [5] registers again to leave
this mode.
Recalling a User Program
Proceed as follows to recall a User Program you saved
earlier:
(1) Press the [ORCHESTRA] and [5] registers.
(2) Press the Treble register ([1]~[10]) that is assigned
to the User Program you want to use.
Note: While you are in User Program mode, the
[METRONOME] button and the Demo function are not avail-
able.
(3) Press the [ORCHESTRA] + [5] registers again to leave
this mode.
Set Number (1~10)
Treble section
Register
Octave setting
Orchestra
section
Register
Octave setting
Bass section Register
Chord section Register
Orchestral Bass
On/Off
Register
Level
Orchestral
Chord
On/Off
Register
Level
Orchestral Free
Bass
On/Off
Register
Level
Free Bass
On/Off
Register
Level
BASS
ORCHESTRA
FREE BS
CHORD/
TREBLE
UP-
BASS
ORCHESTRA
FREE BS
CHORD/
TREBLE
UP-