Reliance Water Heaters RUF 100 199 SERIES 101 User Manual
Page 16
16
USING THE ELECTRONIC CONTROLLER
1. Overview
Interaction with the water heater controller is done through an up, a down, and three operation buttons. These buttons are illustrated to the right. Operation
of the three lower buttons is defined immediately above them on the screen. The [UP] and [DN] buttons are used to navigate through the menus and make
adjustments to the water heater.
While the water heater is operating, the user interface will display the desktop screen (if there are no active fault or alert conditions). An example of this
screen is shown to the right. The first temperature on this screen is the temperature of the water inside the tank. The second temperature on this screen
is the Operating Set Point. The Operating Set Point is the temperature at which the water heater will maintain the water inside the tank. The third line on
the screen is a text description of the Operational State of the water heater (please see Operating States for more details).
The following status icons describe graphically operational details of the heater. The legend of all the status icons is listed below.