Ryobi BGH827 - Manual (Page 10)

10
ADJUSTABLE WRENCH
Fig. 3
COMBINATION WRENCH (3)
7 mm, 10 mm, and 12 mm
PHILLIPS SCREWDRIVER
The following tools (not included) are needed for checking adjustments of your saw or for installing the blade:
TOOLS NEEDED
LOOSE PARTS
The following items are included with your Bench Grinder:
n
Shield Bracket – one left, one right ............................. 2
n Safety Shield Assemblies - left (magnified), right........ 2
n Work Rest – left (grooved), right .................................. 2
n Work Rest Brackets..................................................... 2
n Fastening Knobs (2 large, 2 medium and 2 small) ...... 6
n Washers (6 mm)........................................................... 4
n Washers (5 mm)........................................................... 2
n Lock Washers (6 mm).................................................. 2
n Wheel Dresser Tool (Model BGH827 only) .................. 1
n Operator's Manual
WARNING: The use of attachments or accessories not listed might be hazardous and could cause serious
personal injury.
RIGHT
WORK REST
LEFT WORK REST
(GROOVED)
SAFETY
SHIELD KNOB
WORK
REST KNOB
WORK REST
BRACKETLEFT
SHIELD BRACKET(LEFT)
SHIELD BRACKET (RIGHT)
SAFETY SHIELD (RIGHT)
SAFETY SHIELD (LEFT)
LOCK WASHER WASHER
Fig. 4
WHEEL DRESSING TOOL
(MODEL BGH827 ONLY)
WORK REST
BRACKET RIGHT
REAR SHIELD
BRACKET KNOB