Rival CF106 - Manual (Page 7)

WARNING: ALWAYS TURN CONTROL TO “OFF” THEN DISCONNECT
PLUG FROM WALL OUTLET BEFORE DISCONNECTING
SureRELEASE
™ CORD.
CAUTION:
• Do not immerse cord sets in water or any liquid.
• Do not attempt to defeat the detachable magnetic
SureRELEASE
TM cord
system by trying to permanently attach cord set to product.
• Do not stick pins or other sharp objects in holes on magnetic cord set.
• Do not use any type of steel wool to clean magnetic contacts.
1. Turn unit OFF.
2. Unplug from outlet and allow unit to cool completely.
3. Remove
SureRELEASE
TM magnetic cord from the fryer socket.
4. When unit has cooled, empty cooking oil. If you plan to reuse the
oil, store fryer with lid closed. (See TIPS FOR OIL USE AND STORAGE
on page 9.)
5. When changing the oil, take the opportunity to clean the inside of
the fryer. Remove LID, pour out oil and discard properly; wipe the
inside with paper towels to absorb excess grease. Wash interior of
fryer with hot soapy water. Rinse and dry thoroughly. Do not use
scouring pads or abrasive kitchen cleaners.
CAUTION: Never immerse the fryer in water, or wash in running water.
NOTE: A REMOVABLE CONDENSATION TRAY is located on the back of the
fryer. The CONDENSATION TRAY will collect any water that has condensed
on the inside of the LID when the LID is opened after frying. Remember to
empty and clean the CONDENSATION TRAY after each
use. To clean simply rinse with w
arm water.
TO REMOVE AND REPLACE LID
• To remove lid, depress OPEN LID BUTTON and lift LID to
a vertical position. Remove LID by pulling firmly
upwards (See Figure 2). Reverse the sequence to secure
lid back into position. Be sure to push down firmly on
lid from the vertical position to secure back in place.
-7-
CARE AND CLEANING
Figure 2