Operation – RIDGID R8408 User Manual

Page 20

Advertising
background image

0

OPERATION

USING AN iPod WITH THE JOB-SITE RADIO/
RACE SCANNER

See Figures 22 - 24.
FOR DOCKABLE iPods (with 30-pin connector):

Select

AUX 1 MODE.

Open the drop-down compartment door by pulling up on

the latch handle.

Orient the iPod face up as shown and slide the unit under

the retainer strap.

Make sure that the 30-pin connector on the iPod is aligned

with the 30 pin connector in the door and that the iPod is
pushed down completely to ensure proper docking.

The iPod must be

ON and in PLAY mode for sound to be

heard through the speakers.

The iPod will recharge while playing. The iPod will

recharge when docked, even if the radio power is

OFF.

All iPod controls can be used normally while the unit

is docked, with the exception of the volume. Volume
is controlled through the volume control knob on the
radio.

Turning the radio

OFF while the iPod is docked will NOT

turn the iPod OFF.

To remove the iPod from the dock, simply pull upward to

disconnect.

To protect the iPod from environmental hazards such as

dust, moisture, etc., the drop-down compartment door
must be closed and latched.

For complete operating instructions for the iPod, always

refer to the manual that was included with your iPod
model.

Fig. 

Fig. 3

LCD DISPLAYS

AUX 1 MODE

iPod

30-PIN

CONNECTORS

RETAINER

STRAP

Advertising