Roberts Radio CRD-26 User Manual
Page 11
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Presetting stations
There are 10 memory presets available.
1. Press
the
On/off button to switch on the clock radio.
2. Tune to the required station as previously described.
3. Press
the
Preset button, the display will show "Empty preset 1" if
there are no presets stored.
4. Use
the
Tuning up or down buttons to select the desired preset
number under which you wish to store the station.
5. Press and hold down the Preset button until the display shows e.g.
"Preset 1 saved". The station will be stored under the chosen preset
button. Repeat this procedure for the remaining presets.
6. Stations stored in preset memories may be overwritten by following
the above procedure.
10
1
3
4
4
5