Roberts Radio CRD-26 - Manual (Page 21)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
20
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and hold in the Menu button until the display shows "Press
SELECT to confi rm reset..."
2. Press in and release the Select button to select System reset.
3. A full reset will be performed and the station list together with any
preset stations will be erased.
If a problem persists our technical staff would be pleased to help offer
any assistance on operating the clock radio. Our technical helpline
number is 020 8758 0338.
Software version
The software display cannot be altered and is just for your reference
1. To view which software version your clock radio has press the
Menu button to enter the menu setup.
2. Press the Tuning up or down buttons until "SW Version" appears
on the display. The Version number is displayed on the top line.
1
2
2
1
2