Roberts Radio R9974 - Manual (Page 10)

10
Search tuning
1. Press the Power button to turn on the radio.
2. Select the required waveband by repeatedly pressing the Band button.
For the FM waveband fully extend the Telescopic aerial and set it at
an angle of 45 degrees.
3. Press and hold down either the Tuning up or Tuning down buttons
for more than 0.5 sec to commence scan tuning.
4. The radio will scan the selected waveband and stop automatically
when it fi nds a station of suffi cient strength.
5. To recommence scan tuning, press and hold down either the
Tuning up or Tuning down buttons for more the 0.5 sec.
6. When the waveband end is reached the radio will continue tuning from
the opposite waveband end.
7. Set the Volume control clockwise to the required level.
8. To switch off your radio press the On/Off button. The display will show
OFF.
1 2
3
3
8
7
5
5