Roberts Radio R9974 - Manual (Page 8)

8
Operating your radio
Your radio is equipped with four tuning methods:- Scan tuning, Manual
tuning, Search tuning and Memory preset tuning.
Scan tuning
1. Press the On/Off button to switch on your radio.
2. Select the required waveband by repeatedly pressing the Band button.
For the FM waveband fully extend the Telescopic aerial and set it at
an angle of 45 degrees.
3. Press and release the Scan button to commence scan tuning.
4. The radio will scan the selected waveband and stop automatically
when it fi nds a station of suffi cient strength. Press the Scan button
to listen to the station.
Note: your radio will continue to search for the next available station
if you do not press the Scan button when it fi nds a radio station.
5. When the waveband end is reached the radio will continue tuning from
the opposite waveband end.
6. Set the Volume control clockwise to the required level.
7. To switch off your radio press the On/Off button. The display will show
OFF.
1
2
3
4
7
6