RAD Data comm IPmux-11 - Manual (Page 19)

Installation and Operation Manual Chapter 1 Introduction
IPmux-11 Ver. 2.00 Functional Description 1-5
1.2 Physical Description
IPmux-11 is a compact easy-to-install standalone unit. Figure 1-2 shows a
3-dimensional view of IPmux-11.
Figure 1-2. IPmux-11 3D View
The front panel includes the IPmux-11 LEDs. For the detailed LED description, see
Chapter 3 .
User, network, external clock and management ports, and power supply
connector are located on the rear panel of unit. For further details, see
Chapter 2.
1.3 Functional Description
IPmux-11 provides TDM connectivity across the IP/Ethernet network. A single
bundle (group of timeslots) can be transmitted to a predefined far-end bundle.
IPmux-11 supports ICMP (ping), and generates ARP in case of unknown next hop
MAC addresses, answers ARP requests, and supports the 802.3 VLAN Ethernet
format.
IPmux-11 includes E1 or T1 port. Traffic is transmitted over the network as E1/T1
or fractional E1/T1, using the TDMoIP or TDMoMPLS method.
IPmux-11 supports two Ethernet user ports for user LAN connectivity.
Configuration and management are provided via the IPmux-11 local terminal,
Web-based management utility, Telnet or RADview management tool (SNMP).
Operation Modes
This section describes the IPmux-11 operation modes, which are:
• Unframed E1/T1
• Fractional E1/T1
• Fractional E1/T1 with CAS.