RuggedCom RUGGEDPOWER RP100 - Manual (Page 7)

1. Product Overview
RuggedCom® RuggedPower™ 7 RP100 Installation Guide Rev101
1. Product Overview
1.1. Functional Overview
The RuggedPower™ RP100 is a wide mouth power injector. Data presented on the 10/100 TX
port is coupled with power on the RuggedMax port. This allows for a single CAT-5E STP (shielded
twisted pair) cable between the RP100 and the powered device, providing both data and power.
The RP100 can be ordered with one of two power supply options:
• “LO” power supply option: the RP100 operates on DC power in the range of 10 VDC to 60 VDC
and can deliver power up to 36 W.
• “HI” power supply option: the RP100 operates on AC power in the range of 90 VAC to 264 VAC,
or on DC power in the range of 88 VDC to 300 VDC, and can deliver power up to 25 W.
The RP100 can be ordered with one of two application options:
• “RM” option: the RP100 is intended for RuggedMax WiMax devices only.
• “AT” option: the RP100 complies with the IEEE802.3at specification.
1.2. RP100 Front Panel Description
Figure 1.1. RP100 Front Panel
The front panel LED provides the following indication:
LED Activity Description
Power Solid (Green) Power On
Table 1.1. RP100 Front Panel LED