Installation, Din rail mounting, Ac power supply wiring and grounding – RuggedCom RUGGEDPOWER RP100 User Manual
Page 9: 9 2.2. ac power supply wiring and grounding, Rp100 din rail mounting, 9 2.2. ac power supply and ground connections
Advertising
2. Installation
RuggedCom® RuggedPower™
9
RP100 Installation Guide Rev101
2. Installation
2.1. DIN Rail Mounting
The RP100 comes with a standard DIN rail mounting bracket.
details the mounting configuration for a standard 1" DIN rail.
Figure 2.1. RP100 DIN Rail Mounting
2.2. AC Power Supply Wiring and Grounding
This section applies only to RP100 units equipped with the “HI” power supply option.
Figure 2.2. AC Power Supply and Ground Connections
Connect the AC power supply as follows:
1.
+/L = AC HOT, and is connected to the HOT terminal of the AC power source.
Advertising