Roberts Radio CR99712 - Manual (Page 7)

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-..
020.8758.0338.(Mon-Fri)
Switching on
1. Place your clock radio on a flat surface. Plug the power cord into the
wall socket and switch on.
2. After a few seconds the time, day and date will set automatically.
Your clock radio is fitted with a long life back-up battery to maintain
the factory set time, day and date. Your clock radio will automatically
reset to the correct time should the power source be interrupted. It
will also automatically adjust for summer/winter time.
• The mains plug is used to connect your apparatus to the AC mains
supply. In order to completely disconnect the apparatus from the AC
mains supply, the mains plug should be removed from the mains
outlet.
See section on Back-up battery on page 15 .
Should the time, date or year require adjustment follow the procedure
shown in the next sections.
6
Setting the time manually
1. Press and hold down the Time button.
2. Whilst holding down the Time button press the Up or Down buttons to
set the time. Release the buttons when the correct time is reached.
The clock uses a 12 hour display with a PM indicator. Ensure that
the correct 12 hour cycle is selected.
1 2 2