Roberts Radio CR99712 - Manual (Page 9)

If.you.need.any.further.advice,.please.call.our.Technical.Helpline.on.:-..
020.8758.0338.(Mon-Fri)
Setting alarm times
Your clock radio has two separate alarms which can be set to activate
at different times.
1. Press and hold down the Alarm 1 or Alarm 2 buttons.
2. Whilst holding down the Alarm 1 or Alarm 2 buttons press the Up or
Down buttons to set the alarm time. Release the buttons when the
correct alarm time is reached. The clock uses a 12 hour display with
a PM indicator. Ensure that the correct 12 hour cycle is selected.
8
Setting alarm mode
The alarms can be set to wake you by either the buzzer or the radio.
1. Whilst holding down the Alarm 1 or Alarm 2 buttons repeatedly
press and release the Alarm mode button until the display
shows the required alarm mode e.g. Buzzer ( ),Radio ( ) or
Off ( ). Release the buttons when the required alarm mode is
reached. The display will return to showing normal time.
It is possible to set Alarm 1 to wake to buzzer and Alarm 2 to wake
to radio or vice versa.
The Alarm indicator will illuminate when one or both of the alarms
are set to either Buzz or Radio mode.
The Alarm indicator will extinguish when both Alarms are set to
Off.
1
1
2 2